R 3.3.1 is released

R 3.3.1 (codename “Bug in Your Hair”) was released yesterday You can get the latest binaries version from here. (or the .tar.gz source code from here). The full list of bug fixes is provided below new features and (this release does not introduce new features).

Upgrading to R 3.3.1 on Windows

If you are using Windows you can easily upgrade to the latest version of R using the installr package. Simply run the following code in Rgui:

install.packages("installr") # install 
setInternet2(TRUE) # only for R versions older than 3.3.0
installr::updateR() # updating R.

Running “updateR()” will detect if there is a new R version available, and if so it will download+install it (etc.). There is also a step by step tutorial (with screenshots) on how to upgrade R on Windows, using the installr package. If you only see the option to upgrade to an older version of R, then change your mirror or try again in a few hours (it usually take around 24 hours for all CRAN mirrors to get the latest version of R).

I try to keep the installr package updated and useful, so if you have any suggestions or remarks on the package – you are invited to open an issue in the github page.

Continue reading “R 3.3.1 is released”

heatmaply: interactive heat maps (with R)

I am pleased to announce heatmaply, my new R package for generating interactive heat maps, based on the plotly R package.

tl;dr

By running the following 3 lines of code:

install.packages("heatmaply")
library(heatmaply)
heatmaply(mtcars, k_col = 2, k_row = 3) %>% layout(margin = list(l = 130, b = 40))

You will get this output in your browser (or RStudio console):

Continue reading “heatmaply: interactive heat maps (with R)”

R 3.3.0 is released!

R 3.3.0 (codename “Supposedly Educational”) was released today. You can get the latest binaries version from here. (or the .tar.gz source code from here). The full list of new features and bug fixes is provided below.

Upgrading to R 3.3.0 on Windows

If you are using Windows you can easily upgrade to the latest version of R using the installr package. Simply run the following code in Rgui:

install.packages("installr") # install 
setInternet2(TRUE)
installr::updateR() # updating R.

Running “updateR()” will detect if there is a new R version available, and if so it will download+install it (etc.). There is also a step by step tutorial (with screenshots) on how to upgrade R on Windows, using the installr package. If you only see the option to upgrade to an older version of R, then change your mirror or try again in a few hours (it usually take around 24 hours for all CRAN mirrors to get the latest version of R).

I try to keep the installr package updated and useful, so if you have any suggestions or remarks on the package – you are invited to open an issue in the github page.

CHANGES IN R 3.3.0

SIGNIFICANT USER-VISIBLE CHANGES

  • nchar(x, *)‘s argument keepNA governing how the result for NAs in x is determined, gets a new default keepNA = NA which returns NA where x is NA, except for type = "width" which still returns 2, the formatting / printing width of NA.
  • All builds have support for https: URLs in the default methods for download.file(), url() and code making use of them.Unfortunately that cannot guarantee that any particular https: URL can be accessed. For example, server and client have to successfully negotiate a cryptographic protocol (TLS/SSL, …) and the server’s identity has to be verifiable via the available certificates. Different access methods may allow different protocols or use private certificate bundles: we encountered a https: CRAN mirror which could be accessed by one browser but not by another nor by download.file() on the same Linux machine.

NEW FEATURES

Continue reading “R 3.3.0 is released!”

Election tRends: An interactive US election tracker (using Shiny and Plotly)

Guest post by Jonathan Sidi

Introduction

The US primaries are coming on fast with almost 120 days left until the conventions. After building a shinyapp for the Israeli Elections I decided to update features in the app and tried out plotly in the shiny framework.

As a casual voter, trying to gauge the true temperature of the political landscape from the overwhelming abundance of polling is a heavy task. Polling data is continuously published during the state primaries and the variety of pollsters makes it hard to keep track what is going on. The app self updates using data published publicly by realclearpolitics.com.

The app keeps track of polling trends and delegate count daily for you. You create a personal analysis from the granular level data all the way to distributions using interactive ggplot2 and plotly graphs and check out the general elections polling to peak into the near future.

The app can be accessed through a couple of places. I set up an AWS instance to host the app for realtime use and there is the Github repository that is the maintained home of the app that is meant for the R community that can host shiny locally.

Running the App through Github

(github repo: yonicd/Elections)

#changing locale to run on Windows
if (Sys.info()[1] == "Windows") Sys.setlocale("LC_TIME","C") 

#check to see if libraries need to be installed
libs=c("shiny","shinyAce","plotly","ggplot2","rvest","reshape2","zoo","stringr","scales","plyr","dplyr")
x=sapply(libs,function(x)if(!require(x,character.only = T)) install.packages(x));rm(x,libs)

#run App
shiny::runGitHub("yonicd/Elections",subdir="USA2016/shiny")

#reset to original locale on Windows
if (Sys.info()[1] == "Windows") Sys.setlocale("LC_ALL")

Application Layout:

(see next section for details)

  1. Current Polling
  2. Election Analyis
  3. General Elections
  4. Polling Database

Usage Instructions:

Current Polling

  • The top row depicts the current accumulation of delegates by party and candidate is shown in a step plot, with a horizontal reference line for the threshold needed per party to recieve the nomination. Ther accumulation does not include super delegates since it is uncertain which way they will vote. Currently this dataset is updated offline due to its somewhat static nature and the way the data is posted online forces the use of Selenium drivers. An action button will be added to invoke refreshing of the data by users as needed.
  • The bottom row is a 7 day moving average of all polling results published on the state and national level. The ribbon around the moving average is the moving standard deviation on the same window. This is helpful to pick up any changes in uncertainty regarding how the voting public is percieving the candidates. It can be seen that candidates with lower polling averages and increased variance trend up while the opposite is true with the leading candidates, where voter uncertainty is a bad thing for them.

Snapshot of Overview Plot

Continue reading “Election tRends: An interactive US election tracker (using Shiny and Plotly)”

R 3.2.4 is released

R 3.2.4 (codename “Very Secure Dishes”) was released today. You can get the latest binaries version from here. (or the .tar.gz source code from here). The full list of new features and bug fixes is provided below.

Upgrading to R 3.2.4 on Windows

If you are using Windows you can easily upgrade to the latest version of R using the installr package. Simply run the following code in Rgui:

install.packages("installr") # install 
setInternet2(TRUE)
installr::updateR() # updating R.

Running “updateR()” will detect if there is a new R version available, and if so it will download+install it (etc.). There is also a step by step tutorial (with screenshots) on how to upgrade R on Windows, using the installr package.

I try to keep the installr package updated and useful, so if you have any suggestions or remarks on the package – you are invited to open an issue in the github page.

NEW FEATURES

  • install.packages() and related functions now give a more informative warning when an attempt is made to install a base package.
  • summary(x) now prints with less rounding when x contains infinite values. (Request of PR#16620.)
  • provideDimnames() gets an optional unique argument.
  • shQuote() gains type = "cmd2" for quoting in cmd.exe in Windows. (Response to PR#16636.)
  • The data.frame method of rbind() gains an optional argument stringsAsFactors (instead of only depending on getOption("stringsAsFactors")).
  • smooth(x, *) now also works for long vectors.
  • tools::texi2dvi() has a workaround for problems with the texi2dvi script supplied by texinfo 6.1.

    It extracts more error messages from the LaTeX logs when in emulation mode.

UTILITIES

  • R CMD check will leave a log file ‘build_vignettes.log’ from the re-building of vignettes in the ‘.Rcheck’ directory if there is a problem, and always if environment variable_R_CHECK_ALWAYS_LOG_VIGNETTE_OUTPUT_ is set to a true value.

DEPRECATED AND DEFUNCT

  • Use of SUPPORT_OPENMP from header ‘Rconfig.h’ is deprecated in favour of the standard OpenMP define _OPENMP.

    (This has been the recommendation in the manual for a while now.)

  • The make macro AWK which is long unused by R itself but recorded in file ‘etc/Makeconf’ is deprecated and will be removed in R 3.3.0.
  • The C header file ‘S.h’ is no longer documented: its use should be replaced by ‘R.h’.

BUG FIXES

  • kmeans(x, centers = <1-row>) now works. (PR#16623)
  • Vectorize() now checks for clashes in argument names. (PR#16577)
  • file.copy(overwrite = FALSE) would signal a successful copy when none had taken place. (PR#16576)
  • ngettext() now uses the same default domain as gettext(). (PR#14605)
  • array(.., dimnames = *) now warns about non-list dimnames and, from R 3.3.0, will signal the same error for invalid dimnames as matrix() has always done.
  • addmargins() now adds dimnames for the extended margins in all cases, as always documented.
  • heatmap() evaluated its add.expr argument in the wrong environment. (PR#16583)
  • require() etc now give the correct entry of lib.loc in the warning about an old version of a package masking a newer required one.
  • The internal deparser did not add parentheses when necessary, e.g. before [] or [[]]. (Reported by Lukas Stadler; additional fixes included as well).
  • as.data.frame.vector(*, row.names=*) no longer produces ‘corrupted’ data frames from row names of incorrect length, but rather warns about them. This will become an error.
  • url connections with method = "libcurl" are destroyed properly. (PR#16681)
  • withCallingHandler() now (again) handles warnings even during S4 generic’s argument evaluation. (PR#16111)
  • deparse(..., control = "quoteExpressions") incorrectly quoted empty expressions. (PR#16686)
  • format()ting datetime objects ("POSIX[cl]?t") could segfault or recycle wrongly. (PR#16685)
  • plot.ts(<matrix>, las = 1) now does use las.
  • saveRDS(*, compress = "gzip") now works as documented. (PR#16653)
  • (Windows only) The Rgui front end did not always initialize the console properly, and could cause R to crash. (PR#16998)
  • dummy.coef.lm() now works in more cases, thanks to a proposal by Werner Stahel (PR#16665). In addition, it now works for multivariate linear models ("mlm", manova) thanks to a proposal by Daniel Wollschlaeger.
  • The as.hclust() method for "dendrogram"s failed often when there were ties in the heights.
  • reorder() and midcache.dendrogram() now are non-recursive and hence applicable to somewhat deeply nested dendrograms, thanks to a proposal by Suharto Anggono in PR#16424.
  • cor.test() now calculates very small p values more accurately (affecting the result only in extreme not statistically relevant cases). (PR#16704)
  • smooth(*, do.ends=TRUE) did not always work correctly in R versions between 3.0.0 and 3.2.3.
  • pretty(D) for date-time objects D now also works well if range(D) is (much) smaller than a second. In the case of only one unique value in D, the pretty range now is more symmetric around that value than previously.
    Similarly, pretty(dt) no longer returns a length 5 vector with duplicated entries for Date objects dt which span only a few days.
  • The figures in help pages such as ?points were accidentally damaged, and did not appear in R 3.2.3. (PR#16708)
  • available.packages() sometimes deleted the wrong file when cleaning up temporary files. (PR#16712)
  • The X11() device sometimes froze on Red Hat Enterprise Linux 6. It now waits for MapNotify events instead of Expose events, thanks to Siteshwar Vashisht. (PR#16497)
  • [dpqr]nbinom(*, size=Inf, mu=.) now works as limit case, for ‘dpq’ as the Poisson. (PR#16727)
    pnbinom() no longer loops infinitely in border cases.
  • approxfun(*, method="constant") and hence ecdf() which calls the former now correctly “predict” NaN values as NaN.
  • summary.data.frame() now displays NAs in Date columns in all cases. (PR#16709)

 

logo

It’s not the p-values’ fault – reflections on the recent ASA statement (+relevant R resources)

Joint post by Yoav Benjamini and Tal Galili. The post highlights points raised by Yoav in his official response to the ASA statement (available as on page 4 in the ASA supplemental tab), as well as offers a list of relevant R resources.

Summary

The ASA statement about the misuses of the p-value singles it out. It is just as well relevant to the use of most other statistical methods: context matters, no single statistical measure suffices, specific thresholds should be avoided and reporting should not be done selectively. The latter problem is discussed mainly in relation to omitted inferences. We argue that the selective reporting of inferences problem is serious enough a problem in our current industrialized science even when no omission takes place. Many R tools are available to address it, but they are mainly used in very large problems and are grossly underused in areas where lack of replicability hits hard.

p_valuesSource: xkcd

Continue reading “It’s not the p-values’ fault – reflections on the recent ASA statement (+relevant R resources)”

50 years of Data Science – by David Donoho

David Donoho published a fascinating paper based on a presentation at the Tukey Centennial workshop, Princeton NJ Sept 18 2015. You can download the full paper from here. 

The paper got quite the attention on Hacker News, Data Science Central, Simply Stats, Xi’an’s blog, srown ion medium, and probably others. Share your thoughts in the comments.

Here is the abstract and table of content.

Abstract

More than 50 years ago, John Tukey called for a reformation of academic statistics. In ‘The Future of Data Analysis’, he pointed to the existence of an as-yet unrecognized science, whose subject of interest was learning from data, or ‘data analysis’. Ten to twenty years ago, John Chambers, Bill Cleveland and Leo Breiman independently once again urged academic statistics to expand its boundaries beyond the classical domain of theoretical statistics; Chambers called for more emphasis on data preparation and presentation rather than statistical modeling; and Breiman called for emphasis on prediction rather than inference. Cleveland even suggested the catchy name “Data Science” for his envisioned field.

A recent and growing phenomenon is the emergence of “Data Science” programs at major universities, including UC Berkeley, NYU, MIT, and most recently the Univ. of Michigan, which on September 8, 2015 announced a $100M “Data Science Initiative” that will hire 35 new faculty. Teaching in these new programs has significant overlap in curricular subject matter with traditional statistics courses; in general, though, the new initiatives steer away from close involvement with academic statistics departments.

This paper reviews some ingredients of the current “Data Science moment”, including recent commentary about data science in the popular media, and about how/whether Data Science is really different from Statistics.

The now-contemplated field of Data Science amounts to a superset of the fields of statistics and machine learning which adds some technology for ‘scaling up’ to ‘big data’. This chosen superset is motivated by commercial rather than intellectual developments. Choosing in this way is likely to miss out on the really important intellectual event of the next fifty years.

Because all of science itself will soon become data that can be mined, the imminent revolution in Data Science is not about mere ‘scaling up’, but instead the emergence of scientific studies of data analysis science-wide. In the future, we will be able to predict how a proposal to change data analysis workflows would impact the validity of data analysis across all of science, even predicting the impacts field-by-field. Drawing on work by Tukey, Cleveland, Chambers and Breiman, I present a vision of data science based on the activities of people who are ‘learning from data’, and I describe an academic field dedicated to improving that activity in an evidence-based manner. This new field is a better academic enlargement of statistics and machine learning than today’s Data Science Initiatives, while being able to accommodate the same short-term goals.

Contents

1 Today’s Data Science Moment

2 Data Science ‘versus’ Statistics

2.1 The ‘Big Data’ Meme

2.2 The ‘Skills’ Meme

2.3 The ‘Jobs’ Meme

2.4 What here is real?

2.5 A Better Framework

3 The Future of Data Analysis, 1962

4 The 50 years since FoDA

4.1 Exhortations

4.2 Reification

5 Breiman’s ‘Two Cultures’, 2001

6 The Predictive Culture’s Secret Sauce

6.1 The Common Task Framework

6.2 Experience with CTF

6.3 The Secret Sauce

6.4 Required Skills

7 Teaching of today’s consensus Data Science

8 The Full Scope of Data Science

8.1 The Six Divisions

8.2 Discussion

8.3 Teaching of GDS

8.4 Research in GDS

8.4.1 Quantitative Programming Environments: R

8.4.2 Data Wrangling: Tidy Data

8.4.3 Research Presentation: Knitr

8.5 Discussion

9 Science about Data Science

9.1 Science-Wide Meta Analysis

9.2 Cross-Study Analysis

9.3 Cross-Workflow Analysis

9.4 Summary

10 The Next 50 Years of Data Science

10.1 Open Science takes over

10.2 Science as data

10.3 Scientific Data Analysis, tested Empirically

10.3.1 DJ Hand (2006)

10.3.2 Donoho and Jin (2008)

10.3.3 Zhao, Parmigiani, Huttenhower and Waldron (2014)

10.4 Data Science in 2065

11 Conclusion

You can download the full paper from here. 

Multidimensional Scaling with R (from “Mastering Data Analysis with R”)

Guest post by Gergely Daróczi. If you like this content, you can buy the full 396 paged e-book for 5 USD until January 8, 2016 as part of Packt’s “$5 Skill Up Campaign” at https://bit.ly/mastering-R

Feature extraction tends to be one of the most important steps in machine learning and data science projects, so I decided to republish a related short section from my intermediate book on how to analyze data with R. The 9th chapter is dedicated to traditional dimension reduction methods, such as Principal Component Analysis, Factor Analysis and Multidimensional Scaling — from which the below introductory examples will focus on that latter.

Multidimensional Scaling (MDS) is a multivariate statistical technique first used in geography. The main goal of MDS it is to plot multivariate data points in two dimensions, thus revealing the structure of the dataset by visualizing the relative distance of the observations. Multidimensional scaling is used in diverse fields such as attitude study in psychology, sociology or market research.

Although the MASS package provides non-metric methods via the isoMDS function, we will now concentrate on the classical, metric MDS, which is available by calling the cmdscale function bundled with the stats package. Both types of MDS take a distance matrix as the main argument, which can be created from any numeric tabular data by the dist function.

But before such more complex examples, let’s see what MDS can offer for us while working with an already existing distance matrix, like the built-in eurodist dataset:

> as.matrix(eurodist)[1:5, 1:5]
          Athens Barcelona Brussels Calais Cherbourg
Athens         0      3313     2963   3175      3339
Barcelona   3313         0     1318   1326      1294
Brussels    2963      1318        0    204       583
Calais      3175      1326      204      0       460
Cherbourg   3339      1294      583    460         0

The above subset (first 5-5 values) of the distance matrix represents the travel distance between 21 European cities in kilometers. Running classical MDS on this example returns:

> (mds <- cmdscale(eurodist))
                      [,1]      [,2]
Athens           2290.2747  1798.803
Barcelona        -825.3828   546.811
Brussels           59.1833  -367.081
Calais            -82.8460  -429.915
Cherbourg        -352.4994  -290.908
Cologne           293.6896  -405.312
Copenhagen        681.9315 -1108.645
Geneva             -9.4234   240.406
Gibraltar       -2048.4491   642.459
Hamburg           561.1090  -773.369
Hook of Holland   164.9218  -549.367
Lisbon          -1935.0408    49.125
Lyons            -226.4232   187.088
Madrid          -1423.3537   305.875
Marseilles       -299.4987   388.807
Milan             260.8780   416.674
Munich            587.6757    81.182
Paris            -156.8363  -211.139
Rome              709.4133  1109.367
Stockholm         839.4459 -1836.791
Vienna            911.2305   205.930

These scores are very similar to two principal components (discussed in the previous, Principal Component Analysis section), such as running prcomp(eurodist)$x[, 1:2]. As a matter of fact, PCA can be considered as the most basic MDS solution.

Anyway, we have just transformed (reduced) the 21-dimensional space into 2 dimensions, which can be plotted very easily — unlike the original distance matrix with 21 rows and 21 columns:

> plot(mds)

2028OS_09_16

Does it ring a bell? If not yet, the below image might be more helpful, where the following two lines of code also renders the city names instead of showing anonymous points:

> plot(mds, type = 'n')
> text(mds[, 1], mds[, 2], labels(eurodist))
2028OS_09_17

Continue reading “Multidimensional Scaling with R (from “Mastering Data Analysis with R”)”

R 3.2.3 is released (with improvements for Windows users, and general bug fixes)

R 3.2.3 (codename “Wooden Christmas Tree”) was released several days ago. You can get the latest binaries version from here. (or the .tar.gz source code from here). The full list of new features and bug fixes is provided below.

Major changes in R 3.2.3

As highlighted by David Smith, this release makes a few small improvements and bug fixes to R, including:

  • Improved support for users of the Windows OS in time zones, OS version identification, FTP connections, and printing (in the GUI).
  • Performance improvements and more support for long vectors in some functions including which.max
  • Improved accuracy for the Chi-Square distribution functions in some extreme cases

Upgrading to R 3.2.3 on Windows

If you are using Windows you can easily upgrade to the latest version of R using the installr package. Simply run the following code in Rgui:

install.packages("installr") # install 
setInternet2(TRUE)
installr::updateR() # updating R.

Running “updateR()” will detect if there is a new R version available, and if so it will download+install it (etc.). There is also a step by step tutorial (with screenshots) on how to upgrade R on Windows, using the installr package.

I try to keep the installr package updated and useful, so if you have any suggestions or remarks on the package – you are invited to open an issue in the github page.

NEW FEATURES

  • Some recently-added Windows time zone names have been added to the conversion table used to convert these to Olson names. (Including those relating to changes for Russia in Oct 2014, as in PR#16503.)
  • (Windows) Compatibility information has been added to the manifests for ‘Rgui.exe’, ‘Rterm.exe’ and ‘Rscript.exe’. This should allow win.version() andSys.info() to report the actual Windows version up to Windows 10.
  • Windows "wininet" FTP first tries EPSV / PASV mode rather than only using active mode (reported by Dan Tenenbaum).
  • which.min(x) and which.max(x) may be much faster for logical and integer x and now also work for long vectors.
  • The ‘emulation’ part of tools::texi2dvi() has been somewhat enhanced, including supporting quiet = TRUE. It can be selected by texi2dvi = "emulation".(Windows) MiKTeX removed its texi2dvi.exe command in Sept 2015: tools::texi2dvi() tries texify.exe if it is not found.
  • (Windows only) Shortcuts for printing and saving have been added to menus in Rgui.exe. (Request of PR#16572.)
  • loess(..., iterTrace=TRUE) now provides diagnostics for robustness iterations, and the print() method for summary(<loess>) shows slightly more.
  • The included version of PCRE has been updated to 8.38, a bug-fix release.
  • View() now displays nested data frames in a more friendly way. (Request with patch in PR#15915.)

BUG FIXES

  • regexpr(pat, x, perl = TRUE) with Python-style named capture did not work correctly when x contained NA strings. (PR#16484)
  • The description of dataset ToothGrowth has been improved/corrected. (PR#15953)
  • model.tables(type = "means") and hence TukeyHSD() now support "aov" fits without an intercept term. (PR#16437)
  • close() now reports the status of a pipe() connection opened with an explicit open argument. (PR#16481)
  • Coercing a list without names to a data frame is faster if the elements are very long. (PR#16467)
  • (Unix-only) Under some rare circumstances piping the output from Rscript or R -f could result in attempting to close the input file twice, possibly crashing the process. (PR#16500)
  • (Windows) Sys.info() was out of step with win.version() and did not report Windows 8.
  • topenv(baseenv()) returns baseenv() again as in R 3.1.0 and earlier. This also fixes compilerJIT(3) when used in ‘.Rprofile’.
  • detach()ing the methods package keeps .isMethodsDispatchOn() true, as long as the methods namespace is not unloaded.
  • Removed some spurious warnings from configure about the preprocessor not finding header files. (PR#15989)
  • rchisq(*, df=0, ncp=0) now returns 0 instead of NaN, and dchisq(*, df=0, ncp=*) also no longer returns NaN in limit cases (where the limit is unique). (PR#16521)
  • pchisq(*, df=0, ncp > 0, log.p=TRUE) no longer underflows (for ncp > ~60).
  • nchar(x, "w") returned -1 for characters it did not know about (e.g. zero-width spaces): it now assumes 1. It now knows about most zero-width characters and a few more double-width characters.
  • Help for which.min() is now more precise about behavior with logical arguments. (PR#16532)
  • The print width of character strings marked as "latin1" or "bytes" was in some cases computed incorrectly.
  • abbreviate() did not give names to the return value if minlength was zero, unlike when it was positive.
  • (Windows only) dir.create() did not always warn when it failed to create a directory. (PR#16537)
  • When operating in a non-UTF-8 multibyte locale (e.g. an East Asian locale on Windows), grep() and related functions did not handle UTF-8 strings properly. (PR#16264)
  • read.dcf() sometimes misread lines longer than 8191 characters. (Reported by Hervé Pagès with a patch.)
  • within(df, ..) no longer drops columns whose name start with a ".".
  • The built-in HTTP server converted entire Content-Type to lowercase including parameters which can cause issues for multi-part form boundaries (PR#16541).
  • Modifying slots of S4 objects could fail when the methods package was not attached. (PR#16545)
  • splineDesign(*, outer.ok=TRUE) (splines) is better now (PR#16549), and interpSpline() now allows sparse=TRUE for speedup with non-small sizes.
  • If the expression in the traceback was too long, traceback() did not report the source line number. (Patch by Kirill Müller.)
  • The browser did not truncate the display of the function when exiting with options("deparse.max.lines") set. (PR#16581)
  • When bs(*, Boundary.knots=) had boundary knots inside the data range, extrapolation was somewhat off. (Patch by Trevor Hastie.)
  • var() and hence sd() warn about factor arguments which are deprecated now. (PR#16564)
  • loess(*, weights = *) stored wrong weights and hence gave slightly wrong predictions for newdata. (PR#16587)
  • aperm(a, *) now preserves names(dim(a)).
  • poly(x, ..) now works when either raw=TRUE or coef is specified. (PR#16597)
  • data(package=*) is more careful in determining the path.
  • prettyNum(*, decimal.mark, big.mark): fixed bug introduced when fixing PR#16411.

INSTALLATION and INCLUDED SOFTWARE

  • The included configuration code for libintl has been updated to that from gettext version 0.19.5.1 — this should only affect how an external library is detected (and the only known instance is under OpenBSD). (Wish of PR#16464.)
  • configure has a new argument –disable-java to disable the checks for Java.
  • The configure default for MAIN_LDFLAGS has been changed for the FreeBSD, NetBSD and Hurd OSes to one more likely to work with compilers other than gcc(FreeBSD 10 defaults to clang).
  • configure now supports the OpenMP flags -fopenmp=libomp (clang) and -qopenmp (Intel C).
  • Various macros can be set to override the default behaviour of configure when detecting OpenMP: see file ‘config.site’.
  • Source installation on Windows has been modified to allow for MiKTeX installations without texi2dvi.exe. See file ‘MkRules.dist’.

“Why do people contribute to the R?” – concolusions from a new PNAS article

tl;dr: People contribute to R for various reasons, which evolves with time. The main reasons appear to be: “fun coding”, personal commitment to the community, interaction with like-minded and/or important people  – leading to higher self-esteem, future job opportunities, a chance to express oneself and enjoyable social inclusion.

From the abstract

One of the cornerstones of the R system for statistical computing is the multitude of packages contributed by numerous package authors. This amount of packages makes an extremely broad range of statistical techniques and other quantitative methods freely available. Thus far, no empirical study has investigated psychological factors that drive authors to participate in the R project. This article presents a study of R package authors, collecting data on different types of participation (number of packages, participation in mailing lists, participation in conferences), three psychological scales (types of motivation, psychological values, and work design characteristics), and various socio-demographic factors. The data are analyzed using item response models and subsequent generalized linear models, showing that the most important determinants for participation are a hybrid form of motivation and the social characteristics of the work design. Other factors are found to have less impact or influence only specific aspects of participation.

Summary of results

R developers, statisticians, and psychologists from Harvard University, University of Vienna, WU Vienna University of Economics, and University of Innsbruck empirically studied psychosocial drivers of participation of R package authors. Through an online survey they collected data from 1,448 package authors. The questionnaire included psychometric scales (types of motivation, psychological values, work design), sociodemografic variables related to the work on R, and three participation measures (number of packages, participation in mailing lists, participation in conferences).

cranpnas-dia

The data were analyzed using item response models and subsequently generalized linear models (logistic regressions, negative-binomial regression) with SIMEX corrected parameters.

The analysis reveals that the most important determinants for participation are a hybrid form of motivation and the social characteristics of the work design. Hybrid motivation acknowledges that motivation is a complex continuum of intrinsic, extrinsic, and internalized extrinsic motives.
Motives evolve over time, as task characteristics shift from need-driven problem solving to mundane maintenance tasks within the R community.
For instance, motivation can evolve from pure “fun coding” towards a personal commitment with associated higher responsibilities within the community. The community itself provides a social work environment with high degrees of interaction, two facets of which are strong motivators. First, interaction with persons perceived as important increases one’s own reputation (self-esteem, future job opportunities, etc.) Second, interaction with alike minded persons (i.e., interested in solving statistical problems) creates opportunities to express oneself and enjoy social inclusion.

The findings do not substantiate the commonly held perception that people develop packages out of purely altruistic motives. It is also notable that in most cases package development is undertaken as part of an individual’s research, which is paid by an (academic) institution, rather than uncompensated developments that cut into leisure time.

Full paper (behind PNAS’s paywall for now) is available here:

Mair, P., Hofmann, E., Gruber, K., Hatzinger, R., Zeileis, A., and Hornik, K. (2015). Motivation, values, and work design as drivers of participation in the R
open source project for statistical computing. Proceedings of the National Academy of Sciences of the United States of America, 112(48), 14788-14792